µUSB-MB5

The μUSB-MB5 (microUSB-MB5) is a USB to Serial converter module which is simple, cost effective, very small and easy to use. It uses a mini-B type USB connector to connect to your PC and is based on the CP2102 Bridge from Silicon Labs. It provides the user with multi baud rate serial data and access to flow control signals in a convenient 10 pin 0.1” pitch Dual-In-Line package.

The μUSB-MB5 is ideal for prototype or production. It is also an essential hardware tool used for programming PmmC firmware files and 4DGL user code downloads into the GOLDELOX-GFX and PICASO-GFX processors embedded in many 4D intelligent modules.

Features

USB 2.0 compliant Full Speed 12Mbps maximum speed; Suspend supported

Hardware or Xon/Xoff handshaking supported; 300bps to 1Mbps

UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity

Integrated EEPROM for Vendor ID, product ID, serial number, release number

On-chip 3.3V regulator available; power on reset circuit

Virtual COM port drivers allow operation with existing COM port PC application

Supports Windows, MAC (OSX-9 and above) and Linux (2.4 kernel and above)

Self powered or USB powered; -40 to +85 deg C temp range

Small size; 15.4mm x 17.7mm (0.5” x 0.5”) approx.

Traffic/Operation LED indicates board status

Downloads and Further Info

Datasheet

Full Product Details